I will be hosting an AK Build Party in April. The only two Saturdays that I can host it will be April 18 or 25. Respond to the survey above to let me know which Saturday that you can attend.
I will allow my AK47 1.0 and 1.5mm flat bending jigs to be used to make new receivers from flats at a build party if the following conditions are met:
1. You have an approved Form 1 for an AK based SBR or;
2. You have a rear pistol trunnion in-hand and;
3. After you bend that flat, the pistol trunnion is riveted to that flat before you leave the build party.
This is the only way that I would feel comfortable letting someone use my flat bending jigs to make a new AK receiver.
See you there!
I will allow my AK47 1.0 and 1.5mm flat bending jigs to be used to make new receivers from flats at a build party if the following conditions are met:
1. You have an approved Form 1 for an AK based SBR or;
2. You have a rear pistol trunnion in-hand and;
3. After you bend that flat, the pistol trunnion is riveted to that flat before you leave the build party.
This is the only way that I would feel comfortable letting someone use my flat bending jigs to make a new AK receiver.
See you there!
Southern Maryland AK Build Party - Part 4
0 commentaires:
Enregistrer un commentaire